Service Levels Offered

Features	ANSI Z540.1 Compliant _{(with OOT Data) Meets 009-13}	ANSI Z540.1 Compliant _{(with All Test Data)}	ISO/IEC 17025:2017 Accredited _{(Simple Decision)}	ISO/IEC 17025:2017 Accredited _{(with Guard Banding) ANSI Z540.3 Compliant}
CalCloud™ Database Access	✔	✔	✔	✔
Calibrated to a Defined Specification.	✔	✔	✔	✔
Ensure Test Accuracy Requirements	✔	✔	✔	✔
Equipment Traceability to an (SI) maintained by NMI’s	✔	✔	✔	✔
NAVSEA 009-04 _{Meets 009-04 FY22}	✔	✔	✔	✔
MIL-STD-45662A	✔	✔	✔	✔
Supplemental Data		✔	✔	✔
Covered by Laboratory Scope of Accreditation			✔	✔
Stated Risk Contributions, Metrological Traceability, and Measurement Uncertainty			✔	✔
Reduced Risk Through Guardbanding *				✔
ANSI Z540.3 Compliant Service				✔
NAVSEA 009-04 _{Meets 009-04 FY23+}				✔

_{* Standard Calibrations Inc. provides ISO/IEC 17025:2017 accredited services with guard banding utilizing Z540.3 Method 6 to ensure a probability of false acceptance rate of less than two percent.}

Calibration

Service Levels

Features

No Data

With Data

ISO/IEC 17025:2017 Accredited

ISO/IEC 17025:2017 Accredited
with Guard Banding

CalCloud™ Database Access

Check.png__PID:0f34dfa7-59df-4eb8-b0fb-cb40b6026b6a

Calibrated to a Defined Specification

Ensure Test Accuracy Requirements

Equipment Traceability to an (SI) maintained by NMI’s

NAVSEA 009-04 Meets 009-04 FY22

MIL-STD-45662A

OOT Test Data Included

All Test Data Included

Covered by Laboratory Scope of Accreditation

Stated Risk Contributions, Metrological Traceability, and Measurement Uncertainty

Reduced Risk Through Guardbanding *

ANSI Z540.3 Compliant Service

NAVSEA 009-04 Meets 009-04 FY23+

* Standard Calibrations Inc. is accredited to ISO/IEC 17025:2017 and applies clearly defined decision rules that incorporate measurement uncertainty. When guard-banding is used, we follow the ANSI/NCSL Z540.3 Method 6 approach, which adjusts acceptance limits to help ensure a low probability of false acceptance (typically targeted at less than 2%), providing our customers with greater confidence in conformity decisions.

No Data

Compliant calibration to ANSI/NCSL Z540.1-1994 provides complete coverage for the recommended data range, and out-of-tolerance results are provided where applicable.

With Data

Compliant calibration to ANSI/NCSL Z540.1-1994 and includes the entire suite of data observed during the calibration.

ISO/IEC 17025:2017 Accredited

An ISO/IEC 17025:2017 accredited service which includes the entire suite of data observed during the calibration, the stated test uncertainty contributions identified in the calibration, and a defined ratio for the impact of uncertainties on measurements taken.

ISO/IEC 17025:2017 Accreditedwith Guard Banding

ANSI Z540.3 Compliant (NAVSEA 009-04)

AN ISO/IEC 17025:2017 accredited and/or ANSI/NCSL Z540.3 compliant service which includes the entire suite of data observed during the calibration, the stated test uncertainty contributions identified in the calibration, a defined ratio for the impact of uncertainties on measurements taken, and tolerance limits which include the identified uncertainty impact identified to ensure a probability of false acceptance rate less than two percent.

Features

ANSI Z540.1 Compliant (with OOT Data) Meets 009-13

ANSI Z540.1 Compliant (with All Test Data)

ISO/IEC 17025:2017 Accredited (Simple Decision)

ISO/IEC 17025:2017 Accredited (with Guard Banding) ANSI Z540.3 Compliant

CalCloud™ Database Access

Calibrated to a Defined Specification

Ensure Test Accuracy Requirements

Equipment Traceability to an (SI) maintained by NMI’s

NAVSEA 009-04 Meets 009-04 FY22

MIL-STD-45662A

Supplemental Data

Dots.png__PID:b0238b04-1624-4669-88ef-5daef06097c1

Covered by Laboratory Scope of Accreditation

Dots_white.png__PID:fd8bae3d-0801-47c7-8b5b-a680bf4cf3bb

Stated Risk Contributions, Metrological Traceability, and Measurement Uncertainty

Reduced Risk Through Guardbanding *

ANSI Z540.3 Compliant Service

NAVSEA 009-04Meets 009-04 FY23+

* Standard Calibrations Inc. provides ISO/IEC 17025:2017 accredited services with guard banding utilizing Z540.3 Method 6 to ensure a probability of false acceptance rate of less than two percent.

ANSI Z540.1 Compliant (with OOT Data)

Compliant calibration to ANSI/NCSL Z540.1-1994 provides complete coverage for the recommended data range, and out-of-tolerance results are provided where applicable.

ANSI Z540.1 Compliant (with Test Data)

Compliant calibration to ANSI/NCSL Z540.1-1994 and includes the entire suite of data observed during the calibration.

ISO/IEC 17025:2017 Accredited (Simple Decision)

ISO/IEC 17025:2017 Accredited (with Guard Banding)